Buy 99%+ Purity Skin Tanning Polypeptides Melanotan II (MT-2) Peptide (10mg / vial) Powder Online
Melanotan-2 Benefits:
1) Lasting Tan: Even if the dosage is stopped, a warm sun-kissed tan can last for months at a time without any exposure to the sun. Conversely, tans developed naturally fade in around a months time.
2) Flexibility of Use: Able to take a small loading dose with continued dosing until desired skin pigmentation is achieved. Once achieved only need to dose once every couple of weeks to maintain the same pigment.
3) Reduced exposure to sunlight (UV rays): Melanotan still needs exposure to sunlight to be effective. However, it will allow the user a significant reduction in time to develop the desired tan.
How does Melanotan-2 works?
Melanotan-2 Mt2 works by stimulating the release of the pigment melanin from the skin. Less UV exposure is necessary with Melanotan 2 compared to “normal tanning”, and the tan that occurs with tanning injections is deeper and longer lasting than an individual’s “normal tan”. Melanotan works best (has the most noticeable effects) on people with fair skin tones.
Melanotan-2 Dosage
Research quality peptides are supplied as a lyophilized powder that must be mixed with bacteriostatic water for injection just prior to use. A suggested research dose is weight based. Below example is for average 154lb/70kg adult
0.25mg |
very light |
0.5mg |
light |
1mg |
common standard |
1.5mg |
strong |
2mg |
very strong |
Based on this, 100kg male can take 1.5-2mg as a weekly dosage. An 110lb/50kg female should start off with 0.25mg to be safe and then move to 0.5mg and 1mg if needed.
Pre-loading does is 2x or 3x smaller than your normal maintenance dosage. As a reminder, you do not need to do this unless you are in a rush to get really dark in a matter of days.
Noteworthy: Many online sources sell an ineffective product. Also, peptides are fragile by nature and are not effective when they are taken orally (pills, shakes, etc) because they will be broken down by the dige
Melanotan 2 Specification:
ITEM |
SPECIFICATION |
Appearance |
White Crystalline Powder |
Assay |
≥99% |
Heavy Metals |
≤10ppm |
Arsenic |
≤1ppm |
Lead |
≤3ppm |
Mercury |
≤0.1ppm |
Cadmium |
≤1ppm |
Total Plate Count |
≤1000cfu/g |
Yeast & Mold |
≤100cfu/g |
E.Coli |
Negative |
Salmonella |
Negative |
Conclusion |
The product conforms to the standard. |